Be sure to clean spider webs out of the venturi tubes as described below.

You may open your grill in the spring and find remnants of the meal you cooked on it last season. Don’t worry. According to Howtocleananything.com, cleaning the grill is actually easier than most people realize, and you can usually forego the brushes, dirty sink and elbow grease if you start the day before you need the grill. However, use the following method only after checking with your owner’s manual. Some manufacturers warn against using oven cleaner on any part of their grill.

Lay a plastic bag on the ground, followed by a newspaper, then lay your grill on top of the newspaper. Spray liberally with an oven cleaner, and cover with another layer of moist newspaper. Follow this with another plastic bag and weigh down the edges so the whole mess doesn’t end up in your neighbors yard. Now instead of scrubbing and scouring, just let the oven cleaner do the work for you overnight. The next day, remove the grill and place all the saturated newspaper into one of the garbage bags. Wear gloves and follow all of the manufacturers safety precautions whenever working with caustic cleaners, such as oven cleaner. Rinse the grill thoroughly, and then wash off any remaining oven cleaner residue with some soapy water. Rinse again, coat with a light brushing of vegetable oil, and you’re ready to go! It is a good plan to fire up your barbeque for 30 to 45 minutes on High temperature to sanitize everything before the first use of the season. How do I season the cooking grids for the first time?

For a new grill, you need to burn off the protective oils that are applied by the manufacturer by running the grill on high for about 30 minutes. After the grill cools, coat the grids with a vegetable oil spray and run for 30-45 minutes on high. This will draw the oil into the grids and prevent foods from sticking.

How do I clean the cooking grids?

As soon as the food is removed from the grill, brush the grills with a grill brush for about 10 seconds. If you have porcelain-coated grills make sure you only use a brass bristle brush, never scraping the grill with the scraper that is usually attached to most brushes.

Then turn off the grill immediately. After the grill has cooled down spray vegetable oil, such as Pam, liberally on the grill (this should also be done before you light the grill each time as well). What this does is loosen whatever food is stuck to the grill, knocking it into the bottom of the grill where it will be incinerated the next time the grill is pre-heated.

Turning the grill on high for ten minutes will emulate a self-cleaning oven, but that is like using your grill twice. Of course you may forget you are burning off your grill, and it can easily be left on for 30 minutes or more. This puts your grill through the same stress as using it 3 or 4 times, meaning you will need to purchase new parts, or even a new grill, much sooner than you should have to.

If you feel you just must burn off your grill, once a month won’t really hurt anything, but religiously brushing for 10 seconds as soon as you’re done cooking and keeping the grills well oiled is all anyone should have to do.

To help make the grill easier to keep clean, don’t apply tomato based sauces until the last few minutes before the food is removed from the grill. Marinade and baste the food with vinegar, citrus or soy-based mixtures to help make clean up easier.

How do I clean the burner?

You will from time to time have to clean the burner to keep the burner holes clean. The flame coming from the burner should be blue, if the flame is orange or red you may need to replace or clean the burner. At this time you should also check the gas supply (venturi) tubes to be sure that there are no obstructions. If you use your barbeque heavily you may want to spray a food safe organic cleaner or degreaser and let it sit for a while and hose the entire barbeque off. And for safety sake on your BBQ, you should only open the propane tank valve half a turn. It will work just as well and if there is ever an emergency, you can shut off the gas in an instant!

How do I clean the inside of my grill?

Remove the cooking grids. Using a soft brass wire brush, clean loose debris from casting sides and insides of the lid. Scrape sear plates with a putty knife or scraper, and use a wire brush to remove ash. Remove sear plates and brush debris off of burners with a brass wire brush. Brush all debris from inside the grill into the drip pan. Accumulated grease can cause a fire hazard. Do not line the drip pan with aluminum foil, as it can prevent the grease from flowing properly. The pan should be scraped out with a putty knife or scraper, and all the debris should be scraped into the disposable grease tray. This tray should be replaced every two to four weeks, depending on gas grill usage. For supplies, see your dealer.

How do I clean the outside of my grill?

Do not use abrasive cleaners to clean any painted, porcelain or stainless steel parts. Porcelain enamel components must be handled with additional care. The baked on enamel finish is glass like, and will chip if struck. Touch-up enamel is available from your dealer. Exterior grill surfaces should be cleaned while warm to the touch, with warm soapy water.

How do I clean the stainless steel parts of my grill?

According to the Specialty Steel Industry of North America, stainless steel needs to be cleaned for aesthetic considerations and to preserve corrosion resistance. Stainless steel is protected from corrosion by a thin layer of chromium oxide. Oxygen from the atmosphere combines with the chromium in the stainless steel to form this passive chromium oxide film that protects from further corrosion. Any contamination of the surface by dirt, or other material, hinders this passivation process and traps corrosive agents, reducing corrosion protection. Thus, some form of routine cleaning is necessary to preserve the appearance and integrity of the surface.

Like any surface that is exposed to the environment, stainless steel can get dirty. Dirt and soil can consist of accumulated dust and a variety of contaminates that come from many sources, ranging from the wind to everyday use. These contaminates will vary greatly in their effect on appearance and corrosivity and ease of removal. Frequently, warm water with or without gentle detergent is sufficient. Next in order are mild non-scratching abrasive powders such as typical household cleaners. These can be used with warm water, bristle brushes, sponges, or clean cloths.

Ordinary carbon steel brushes or steel wool should be avoided as they may leave particles embedded on the surface which can lead to RUSTING. For more aggressive cleaning, a small amount of vinegar can be added to the scouring powder. Cleaning should always be followed by rinsing in clean hot water. When water contains mineral soldis, which leave water spots, it is advisable to wipe the surface completely with dry towels.

Fingerprints and Stains – Fingerprints and mild stains resulting from normal use are the most common surface contaminates. Fortunately, these usually affect only appearance and seldom have an effect on corrosion resistance. They are easy to remove by a variety of simple cleaning methods. Fingerprints are probably the most troublesome marks to remove from the surface of smooth polished or bright finished stainless steel. Fortunately, they can be removed with a glass cleaner or by gentle rubbing with a paste of soda ash (sodium carbonate) and water applied with a soft rag. Once again, this should be followed by a thorough warm water rinse. For more stubborn stains see the Specialty Steel Industry of North America’s web site.

How do I clean the aluminum parts of my grill?

This is the beauty of cast aluminum…all you have to do is hose it down. About once a year, take some detergent soap that you would use to wash your automobile, and wash your aluminum grill. With die cast grills, you can leave it outdoors all year round, regardless of the climate. (taken from outdoor-patio-furniture.info)

How do I clean spider webs out of my venturi tubes?

If you notice that your grill is getting hard to light or that the flame isn’t as strong as it should be, take the time to check and clean the venturis. Please refer to the phot os on our website. In some areas of the country, spiders or small insects have been known to create “flashback” problems. The spiders spin webs, build nests, and lay eggs in the grill’s venturi tube(s), obstructing the flow of gas to the burner. The backed-up gas can ignite in the venturi behind the control panel. This is known as a flashback, and it can damage your grill and even cause personal injury.

Shut off, then disconnect the gas supply to your grill. Disconnect then tilt the burner down below your control panel. Run a long handled pipe cleaning brush back and forth in the venturi tubes as pictured below. Reconnect the venturi tubes and gas supply.

About the author:

Harold Wagner has over 15 years experience in the barbecue grill industry and regularly attends the annual HPBA shows to keep current with the latest developments. Gas Grills Now is a member of the Hearth Patio Barbeque Association (HPBA) and has been in business since 1981 with an internet presence since 1997. For more information call toll free 1-877-669-4669.

Written By: Harold Wagner

gas grills and spider webshow do you clean carbon build up on the inside of a gas grill lid?how do you clean the outside of grills

Some of the features on the chart are:

*BTU Output: How many burners, and how many BTUs are standard? You’ll need to do some math to determine the actual heat your food will receive. Ideally, you want to have over 95 BTU’s per square inch of cooking surface. How will you know? Take your total BTU’s and divide it by the primary cooking surface. So…. if your cooking surface is 660 square inches and the total BTU’s are 104,000 then 104,000 BTU’s divided by 660 square inches = 157 BTU’s per square inch. That would be a winner!!!

*Temperature Range: This is a very important characteristic if you like to do a variety of cooking. You’ll be able to do everything from searing steaks to baking pizza with a large temperature range.

*Burner material can consist of cast stainless steel, stainless steel sheet metal, cast iron, infra-red and even cast brass, which is used in commercial settings. Dual burners allow for indirect cooking and better heat control. Cast brass or cast stainless burners are your best bet. They will last longer and are more durable. Grease tends to burn through sheet metal easily.

*Infra-Red Burners are an option for those who demand a well seared steak. Thinking of an infra-red cooking system? Temperatures on an infra-red cooking system can reach up to 1600 degrees on some grills. Infra-red cooking allows for quick, high temperatures, which cuts cooking time and helps seal in juices — perfect for searing a steak. If blackened food or steaks are your taste preference – infra-red cooking is the way to go. If you plan on conventional cooking — go with a hybrid that offers infra-red and standard burners. Tip – make sure you can convert infra-red burners back to standard for large parties.

*Rotisserie backburners are a popular option. Used to cook large pieces of meat evenly, rotisseries use a lot less heat than normal grilling. BTU ranges generally range in the 13-15,000 category but the best grills offer 18-28,000 BTUs. Meats cooked using a rotisserie are generally juicier, self-basted and slow roasted. Tip – look for a model with a drip tray to make cleanup easier. Be sure to compare available rotisserie space, especially if you want to roast a turkey or two.

*A Triple Gourmet Grill allows you to use gas, infra-red AND charcoal cooking! How versatile can you get!!

*An adjustable smoker box is perfect for those who enjoy the added flavor of hickory, mesquite or other wood to your meats. It makes smoking easy. Adjustable vents allow you to control the amount of smoke flavor to provide just the right taste.

*Warranty is one of the most important features to consider. Only the best grills offer a warranty against a condition called burn through which affects the burners.

*Does the grill you are considering offer a countertop model? These types of gas grills can be dropped into an outdoor kitchen which can be customized with your choice of tile, stucco or other solid surfaces, doors, drawers and other accessories like refrigerators or sinks.

*Cooking Grids: Stainless steel cooking surfaces won’t rust or chip. Porcelain cooking surfaces tend to chip and could flake off into food. No N.S.F. (National Sanitation Federation) affiliates use porcelain cooking grids.

*Cooking Grid Size: How many people do you regularly feed? The size of your crowd will determine how big your grill should be. Tip – make sure you can convert infra-red burners back to standard for large parties.

*Inner Liner: This accessory radiates heat more evenly to grill, directs dripping to tray and separates the valve and manifold from combustion chamber. This will prolong the life of your burners and reduce the chances of a grease fire. The grill hood covers the cooking surface and assists in trapping the heated air inside. Look for a double insulated wall hood. If you’re buying a stainless steel model, with a double insulated wall hood, it won’t turn a brown or blue hue. It will keep it’s shine.

*Stainless Steel Flavor Grids: This heat distribution system should be stainless steel for long life and durability. Flavor grids reflect all the heat up toward the grilling surface and vaporizes drippings. You can add wood chips and other flavor enhancers to your flavor grids to add some zest to your choice of meat.

*Fuel Conversion: Will your grill easily convert from natural gas to propane if you want to move it from the back yard to the street for a block party?

*Side burners provide versatility giving you separate controls for each burner. Side burners offer you additional cooking options and come with single or double burners. You can fry up some french fries or treat the team to sweet corn. The BTUs range from 12-17,000, but be sure to look for cast brass or cast stainless burners.

More Great Options:

*A power/wok burner will give you even more cooking diversity. Saute onions or boil lobsters! Brown butter or deep fry a turkey! Having a party? A power burner can accommodate a 26″ wok! With a range of 3,000 – 60,000 Btu’s, the power burner is a definite advantage for any cook!

*A full sear plate or briquette tray (which can also be filled with lava rocks or wood chips) under the cooking surface protects burners and allows for drippings to smolder which gives foods more flavor. Look for a model that will quickly flash the drippings eliminating flare-ups.

*Adding a warming rack will keep food warm and away from direct heat and also give you extra cooking space.

*Add a griddle to your side burner and enjoy breakfast alfresco!

Armed with this information, you should be able to define your needs and choose a grill that will give you many years of great food and good times. Enjoy!

About the author:

Harold Wagner has over 15 years experience in the barbecue grill industry and regularly attends the annual HPBA shows to keep current with the latest developments. Gas Grills Now is a member of the Hearth Patio Barbeque Association (HPBA) and has been in business since 1981 with an internet presence since 1997. For more information call toll free 1-877-669-4669.

Written By: Harold Wagner

august gourmet infrared grillducane 17 000 btu per burner grillssan francisco lynx gas grillvieluxe grill gas conversion

1. Three Levels Of Gas Grills

Entry-level

Thesegas grills are the most basic gas grills available in the market today. They are reasonable priced starting at $ 150 to $ 300. Entry-level gas grills don’t need wood or charcoal and produce their own heat. With regards to this type of gas grill, it is best to choose one made of stainless steel for the frame and main body.

Mid-Range

These gas grills on the other hand are a bit more expensive but also offer more features than the basic gas grill. Prices for mid-range gas grills range from $ 350 to $ 1150. For these types of gas grills it is best to choose those made by established manufacturers in order to get a quality product.

Deluxe Models

These gas grills are the cream of the crop with prices starting at $ 1500 and most models going for more than $ 5000. High-end gas grills often make use of big BTU ratings as a selling point for them. However the brand name and materials of the gas grill should be the main concern when buying a deluxe model gas grill.

2. Basic Elements Of A Gas Grill

The basic structure of most gas grills sold in the market is fairly straightforward. The burners generate heat and some type of heat dispersal system is above the burners. On top of all this are the cooking grates where the food is placed. The equipment underneath the hood is what separates a typical gas grill from an excellent gas grill. A gas grill that has at least two or more individual burners allow for greater heat control. This provides for even heat over the cooking surface thus producing better tasting food. Drippings cannot be avoided when barbecuing, however this causes flare-ups. Certain gas grills are equipped with systems to control flare-ups and turn it into flavorful smoke to enhance the flavor of the food.

3. Understanding BTU (British Thermal Units)

Most gas grills sold in the market use BTUs as the main selling of their product. However most people don’t understand the relevance of BTUs to a gas grill, let alone the meaning of BTU. BTU stands for British thermal unit, which indicates the amount of gas that a gas grill is able to burn. With gas grills, sometimes less BTU are better since it allows for food to cook more efficiently. Too much of it can damage the burners and cut short the life of the gas grill. However for larger grills, having higher BTUs is best in order to cover the larger cooking area.

4. Check For Solid Construction

It is important to select a gas grill with a stable and solid construction. A poorly built gas grill has the tendency to wiggle and may fall apart once set in place. Avoid buying a gas grill that is not displayed on the sales floor, make sure that there is a display available to be able to check out the stability of the gas grill before purchasing it. Select a gas grill that is crafted of high-grade U.S. Steel and also go for a gas grill with a baked-on, porcelain enamel finish. Check that the grates are made from either cast iron, porcelain-coated cast iron or aluminum and stainless steel.

5. Gas Grill Maintenance

When buying a gas grill it is important to consider the amount of maintenance required to keep it running for years to come. Select a brand of gas grill that provides uncomplicated yet comprehensive product information and offers a toll-free customer service line. Check if the brand provide trouble-free access to parts and services along with a reliable dealer network.

About The Author:
For more great gas grill related articles and resources check out http://gasgrills.dinningstyle.com

Written By: Paul Graham

gas barbecues for sale

Compared side by side it is plain to see by our photos at Gas Grills Now, that where a sheet metal burner is not as thick as a U.S. quarter, a cast stainless steel burner is a full INCH thick. Along with being thicker, note the placement of the burner ports on the side of the burner. On the sheet metal burners, the ports are exposed to grease drippings, and food particles, which can clog the ports and speed up the burn-through process. The cast burner is designed with a protective ridge, so that drippings cannot contact the ports.

There are several choices offered to the consumer: Cast stainless steel, Tube stainless steel, Sheet stainless steel, porcelain, cast iron and chrome burners.

* Stainless Steel: Sheet Metal burners are the least expensive. They are mainly used on grills under $800. A tube burner is better than sheet metal, but is still very thin compared to cast. The tube burner is a great place for high end grill manufactures to cut costs. They are not even as thick as a quarter. As far as I know, all tube burners do not cover burn through.

Cast Stainless Steel is the best. Look at the burner pictures and you will see that the cast is 1/4 inch thick.

Warranty covers burn through!

* Cast Iron: Cast-iron conducts heat better which makes it the preferred cooking surface for many cooks. To protect against the natural rusting process, cast-iron cooking grids have a porcelain finish which requires special maintenance.

* Porcelain: Porcelain enamel is essentially a highly durable glass which, with coloring oxides and other inorganic materials, is fused to metal at extremely high temperatures. Most grids are made of steel rods; some are coated with porcelain to make them rust resistant and easier to clean.

* Chrome: Chromium is a silver-gray, lustrous, brittle, hard metal that can be highly polished. It does Not tarnish in air, but burns when heated, forming the green chromic oxide. It is used in plating other metals because of its hardness and non-tarnishing properties. In alloys with other metals it contributes hardness, strength, and heat resistance. This is quicker to burn through. It takes about 1 to 2 years.

About the author:

Harold Wagner has over 15 years experience in the barbecue grill industry and regularly attends the annual HPBA shows to keep current with the latest developments. Gas Grills Now is a member of the Hearth Patio Barbeque Association (HPBA) and has been in business since 1981 with an internet presence since 1997. For more information call toll free 1-877-669-4669.

Written By: Harold Wagner

grill burner cast iron or stainless steel comparison

Why is port formation important? Several reasons. If the hole is punched into a sheet metal burner, it leaves a large tab inside the burner that will cause more chaos while burning. It is more apt to hold trapped food particles and grease, and is therefore more likely to burn through. (Note the Alfresco burner photo.)

Molded ports in cast burners seem like they would be a good idea, but there is considerable difficulty in making them uniform. Thus, it is quicker and less expensive to drill.

Drilled ports are the most uniform and the most precisely placed. They tend to leave a burr on the inside of the burner, which is more noticeable (oddly enough) in a sheet metal burner. Cast burners tend to have smaller burrs.

Fire Magic grill burner has drilled orifices.

Notice (from the photo on our site) the lack of extensive burring, allowing for a smooth flow of gas. Cast stainless leaves few, if any, burrs when drilled. This burner has a lifetime warranty, including against rust and burn-through.

Notice the placement of the ports: on the side, safely below the ridge. This placement will help prevent grease from dripping into the burner, minimizing the possibility of grease entering the burner.

Lynx grill burner is drilled.

Notice (from the picture on our site) the lack of extensive burring, allowing for a smooth flow of gas. Cast brass is similar to cast stainless steel when drilled, leaving few, if any, burrs. This burner carries a lifetime warranty, including against rust and burn-through. It is also interesting to note that Lynx does not offer a replacement burner for any of their grills: simply, you’ll never need one.

Orifice placement is not as good with this burner as with the Fire Magic, but when you consider that you’ll never replace this burner, it probably doesn’t matter all that much.

Alfresco grill burner has punched orifices.

Punched ports like these create substantial ledges where carbon particles and moisture can collect and foster burn-through. This burner has a limited lifetime warranty that only covers manufacturer’s defect. With this design, this burner *will* burn through, and faster than most other burners on the market.

Further, notice the placement of the ports: at 10 o’clock and 2 o’clock; if any grease were to drip onto this burner, it is almost guaranteed to enter these ports, thereby compounding the rust and burn-through issue.

DCS grill burner has drilled orifices.

At least DCS drills burner ports. The burrs, however, are substantial when compared to cast stainless steel, and these will also collect particulates and moisture, which will foster burn-through. This burner also has a limited lifetime warranty that covers manufacturer’s defects only, not rust or burn-through.

This burner has a thicker steel than the Alfresco, but it also has a serious design flaw: the ports are drilled directly on top. If grease were to drip on this burner, it is guaranteed to enter the burner, compounding the rust and burn-through issue!

About The Author

Will Kessel is a contributing author for GasGrillsNow.com. Gas Grills Now has a large selection of charcoal, electric and gas grills from the top name brands at low wholesale prices with free shipping. Click on our link or call toll free 1-877-669-4669 anytime.

Written By: Will Kessel

Isnt it amazing how a simple grilling session on your front yard can trigger delightful bond and overwhelming fun? People, by nature, longs for fun and excitement. Nobody wants to sulk in one corner all the time. He sure wants to take a break and enjoy.

Every person deserves to be happy. Moreover, if you are throwing a bashing small shindig, pool party or a simple gathering, let your guests enjoy to the fullest by preparing them their favorite entertainment and foods.

For sure, just every one likes grilled foods. In order to enjoy the gathering be sure to have gas grills around.

Gas grills have metal box. At the bottom of the box, there are tube-shaped liquid propane burners which are responsible in providing the grills with fuel. Traditionally, propane or natural gas fuel the gas grills. With them, grilling is made faster and easier.

The gas grills burners are topped by warming the exterior of the metal bars, ceramics and lava rocks.

Modern day gas grills are more beneficial. If you want fast pre-heating, gas grills will help you do it pretty fast. Fast in the sense that it can preheat in a matter of 10 to 15 minutes.

Second benefit is its longevity compared to charcoal. One 20-pound tank can last up to 14 hours. You will no longer fret about running short of charcoal. Propane tank is more reliable, that is.

If you are worrying about the mess of grilling, worry no more. Since, gas grills do not use fire starters or charcoal, mess will be out of the situation.

Grass grills use multiple burners. They are especially designed to give superior heat control to secure easy grilling.

If you are contemplating of purchasing gas grills, here are the considerations that you have to take note of:

1. Consider having stainless steel, cast aluminum or porcelain-coated steel for a solid gas grill construction.

2. It is vital to have a built-in thermometer to check the grill temperature.

3. Lava rock system is also good in collecting grease that can result to flare-ups. Try to look for them in the gas grill that you are to purchase.

4. For easy and safe gas grill lighting, be sure to have a push-button ignition.

5. To monitor fuel levels your gas grill must have gas gauge.

6. If you can have three burners that can work separately, the better. This will give you flexibility when it comes to controlling heat.

7. For easy cleaning, the best gas grill material will be stainless steel or porcelain.

Aside from the aforementioned features, you can also incorporate rotisserie or smoker box, side burners, additional outer shelving or work space and removable secondary grill racks.

In order to have a long-lasting gas grill, maintenance is a must. Regularly check on grease catch pan so as not to create flare-ups. Check for leaks, cracks and holes. Finally, be sure to detach tanks from gas grills and keep them out-of-doors.

About The Author

Robert Thatcher is a freelance publisher based in Cupertino, California. He publishes articles and reports in various ezines and provides gas grill resources on http://www.your-gas-grill.info

Written By: Robert Thatcher

built in charcoal barbecuesgrilltipps fun

If you want to do the same, but find your outdoor space lacking when it comes to being equipped for entertainment purposes, one of the best investments you could make is buying a gas grill.

Not only will a new gas grill give the appearance that you are the outdoor entertainment king or queen, a gas grill will bring you a great deal of enjoyment, not to mention great steaks, burgers, dogs, chicken I think you get the picture.

And gas grills are so much more fun than their charcoal pit counterparts. Just imagine the ease and simplicity of turning a control to start your grill. No more messing with charcoal and waiting endlessly until it is hot enough to grill. With gas you can begin grilling almost immediately after the inspiration has struck you.

Gas grills are also very affordable. Some of the most popular models are priced under $500. These grills are usually made out of cast aluminum and offer features such as side burners and rotisseries.

The next pricing level for gas grills starts at more than $500 and can be as high as $1,500. These grills offer more style, versatility and durability. Gas grills in this price range are normally made out of stainless steel and produce better heat than their less expensive counterparts. These grills also can be equipped with cooking lights, rotisseries and multiple cooking surfaces.

If you want a professional grill, be prepared to spend a few thousand dollars. On the other hand, be prepared to embrace the grilling experience of your life. These grills are unbeatable when it comes to style, durability and features.

Many professional gas grills come equipped with multiple cooking surfaces, smoking trays, storage space, and refrigerators, and these grills are made completely with stainless steel down to the very last bolt. Additionally, professional gas grills offer you many cooking options such as natural gas, butane gas, infrared and charcoal, and all of these features can be used at the same time.

So if you are looking for the perfect centerpiece for your summer outdoor entertainment spot, maybe a gas grill is just what you need. A small investment now could bring you decades of outdoor grilling, entertainment and enjoyment. And your family will love you for it.

About the Author:

By Think Gas BBQ Gas Grills http://www.ThinkGas.com

Written By: Randy Myers

gas grills for summer